10pcs PTC Heater 220V 70°C 24x15mm Yoghurt Machine use
10pcs/Lot
Specification
Size:24x15x3mm
Rated Voltage:220V
Rated Power:see below table
Cable/Length:Teflon/150mm
Notice:Surface temperature is the dry heating temperature when heating in dry air(still air)
Pls refer to below for other part number, contact us for order if client required other part number in below:
| 12*8*3mm | 50*20*5mm |
| 12V/120℃/1.5-4W | |
| 5V/70℃/1.2-2W | 220V/270℃/8-30W |
| 24V/230℃/8-20W | 220V/150℃/5-15W |
| 24V/140℃/3-12W | 220V/70℃/3-10W |
| 24V/60℃/2-8W | 24V/140℃/10-35W |
| 5V/180℃/4-9W | 24V/60℃/5-20W |
| 5V/50℃/0.3-1W | 12V/230℃/15-30W |
| 12V/230℃/3-12W | 12V/140℃/5-15W |
| 12V/140℃/1.5-4W | 12V/60℃/3-8W |
| 12V/60℃/1-2.5W | 24V/230℃/15-40W |
| 25*20*5mm | 70*30*6mm |
| 5V/50℃/1-2W | 12V/60℃/5-20W |
| 220V/70℃/2-5W | 12V/140℃/10-20W |
| 220V/100℃/3-8W | 12V/230℃/10-40W |
| 220V/120℃/5-10W | 24V/60℃/10-30W |
| 12V/60℃/2-8W | 24V/140℃/12-40W |
| 12V/140℃/4-12W | 24V/230℃/20-60W |
| 12V/230℃/8-28W | 24V/160℃/15-50W |
| 220V/150℃/5-12W | 220V/70℃/8-25W |
| 220V/180℃/6-15W | 220V/120℃/9-35W |
| 220V/200℃/8-18W | 220V/270℃/120W |
| 220V/230℃/8-20W | |
| 24V/60℃/4-20W | |
| 5V/100℃/4-8W | |
| 24V/140℃/10-40W | |
| 24V/230℃/15-60W | |
| 220V/250℃/9-25W | |
| 220V/270℃/9-30W | |
| 12V/80℃/2-8W | |
| 24V/80℃/4-20W | |
| 30*24*3mm | 100*30*6mm |
| 24V/230℃/50W | 220V/70℃/25W |
| 24V/140℃/40W | 220V/65℃/20W |
| 24V/60℃/20W | 220V/270℃/200W |
| 12V250℃/100W | 12V/60℃/20W |
| 5V/200℃/5W | 12V/230℃/80W |
| 5V/50℃/3W | 220V/120℃/60W |
| 12V/230℃/40W | 24V/60℃/50W |
| 12V/140℃/30W | 24V/230℃/120W |
| 12V/60℃/10W | |
| 30*30*6 | 24*15*3mm |
| 220V/270℃/9-40W | 220V/70℃/8W |
| 220V/150℃/9-30W | 220V/150℃/20W |
| 220V/80℃/8-20W | 220V/280℃/40W |
| 24V/230℃/20-60W | 220V/120℃/15W |
| 24V/140℃/10-50W | (Note:Specially designed for milk device) |
| 24V/60℃/10-40W | |
| 12V/230℃/15-30W | 70*8*3mm |
| 12V/140℃/8-20W | 220V/80℃/5W |
| 12V/60℃/3-20W | 220V/270℃/30W |
| (Note:Specially designed for hot glue gun use) |
Attention For USe:
1.In consideration of thermal expansion, there should be some gap around the PTC heaters
2. For heaters of surface-electrified type, it should be aware that safety distance is necessary to keep away from body, metals and frost. Comparatively, the surface-insulation type is more reliable in safety.
3. When heaters connected to three-phase supply, the middle point should be connected with null line so that terminal voltage would not exceed due to imbalance of voltage.