Optocoupler Semiconductor Device LCR-0202 Series for Electric Circuit
Lot of 100pcs
Overview
Optocoupler is a Optoelectronic devices which use the current changes to control the resistance change. It is a Linear optocoupler which through the strictly selected, aging, testing. It made up of CDS and LED. Package tyoe for LCR-0202 is DIP-4(cuboid small package). It is widely used in audio power amplifier protection and control.
It is recommend that the welding should be made at 4mm of lead wire far away from optoisolator’s seat, and the welding be completed in the shortest possible time.
Features
Pure resistor and non-polarity output
Wide range of analog liner resistance, "on" at the low resistance. "off" at high resistance
Simple circuit configuration suitable for DC and AC use
Input to output isolation, and low distortion coupling
Specification
Input current |
0- 20mA |
Input Voltage |
1.6- 2.5Vdc |
Output Light Resistance |
50Ω - 1KΩ @20mA- 0.01mA |
Output Dark Resistance |
1Ω - 10MΩ @10 seconds off later |
Response Period |
<2.5mS |
Insulating Voltage |
>2500VRMS |
Working Frequency |
<300KHz |
Max Power |
100mW |
Dimension(mm) |
12.5*7.5*8.0 |